Skip to content

Google Ads conversions not recording: check the tag

TroubleshootingUpdated 14 Nov 20263 min read

Cover: a tracking tag and a data line that breaks, then recovers
In this article
  1. Check the tracking status of each action
  2. Check the conversion action settings
  3. Test the tag with Tag Assistant
  4. Tag verified but still no conversions: consider volume
  5. Allow for reporting delay
  6. Checklist
  7. Where AdPilot fits
  8. Sources

When conversions don't show up, Google points to three things to check: the tag, volume and reporting delay. This article walks through five steps: check the tracking status, check the conversion action settings, test the tag with Tag Assistant, consider volume, and allow for reporting delay.

1. Check the tracking status of each action

  1. Go to Goals → Conversions → Summary (source).
  2. Under the "Conversions" dropdown, select All conversions (source).
  3. In the conversions summary table, look at the "Tracking status" column. The statuses to act on: "Unverified", "Tag inactive" and "Needs attention" (source).

2. Check the conversion action settings

On that same Summary page, Google's checklist is to set conversion actions to "Primary" and accept any Terms of Service needed for features such as Enhanced Conversions (source).

3. Test the tag with Tag Assistant

Tag Assistant helps you verify your conversion actions on your website; it's integrated with Google Ads and can be launched from your account (source). From the conversions summary table, you can launch it for actions in the "Unverified", "Tag inactive" or "Needs attention" state (source):

  1. Hover over the status, then select Troubleshoot in the pop-up.
  2. Select Continue to open the Tag Assistant window.
  3. Follow the steps in Tag Assistant: enter the page URL, connect, then make a test conversion on the site.

When you close Tag Assistant, the table refreshes: verified actions appear as "no recent conversions", and once the page receives conversions the status changes to "Recording" (source). After about 30 minutes, the actions verified in that session are updated in your Google Ads account (source).

4. Tag verified but still no conversions: consider volume

According to Google, if you're not seeing conversions, the tag may not have been set up properly, or there hasn't been enough volume yet. For low volume, Google suggests raising bids or budgets, or waiting for volume to build up (source). If step 3 verified the tag, look next at volume and reporting delay (step 5).

5. Allow for reporting delay

  • Reporting can take 3–24 hours to update (source). Don't conclude a tag is broken just because today's numbers haven't arrived.
  • Google Ads attributes conversions to the date of the click, which can cause differences with other platforms (source). When comparing Google Ads with another tool, compare on the same date basis.

Checklist

  • Checked the Tracking status column for each primary action
  • Actions you optimise for are set to Primary; required terms accepted
  • Unverified / Tag inactive / Needs attention: tested with Tag Assistant
  • Waited about 30 minutes after testing, and 3–24 hours for reports
  • Tag verified but few conversions: looked at volume
  • Comparing with another platform: allowed for click-date attribution

Where AdPilot fits

On the Account health screen of AdPilot for Google Ads, the Conversions check flags conversion tags that aren't sending data, next to other checks such as Status, Billing and Budget pacing. For an agency managing many accounts, it shows which account's tag to check first. Testing the tag with Tag Assistant still happens in Google Ads, as in the steps above.

Running Meta ads too? See AdPilot for Meta Ads.

💬 Need help? Join the ALFA Software support group on Telegram (ask in your own language) — or message our support bot privately about your account or invoices.

Checked against Google's documentation on 7 Nov 2026. Google Ads policies and interface can change; when they differ from this article, follow Google's documentation.

Sources

  1. Google — Troubleshoot your conversion tracking status: https://support.google.com/google-ads/answer/12674892
  2. Google — Use Tag Assistant to troubleshoot your unverified or inactive conversion actions: https://support.google.com/google-ads/answer/10989978