Skip to content

Undo an applied change in AdPilot and check the log

Using AdPilotUpdated 14 Nov 20263 min read

Cover: a log timeline with a completed apply entry, a reverse arrow and a completed undo entry
In this article
  1. An undo is a reverse proposal
  2. When it applies straight away, and when it waits
  3. What can’t be reversed
  4. Check it in the log
  5. Why undo has no shortcut
  6. Checklist
  7. Sources

Applied changes can still be undone (source). Where something can’t be reversed, such as deleting a campaign, AdPilot says so (source) — see section 3. This article covers how undo works, when it applies straight away, when it waits for an approver, and where to look back at what was applied.

1. An undo is a reverse proposal

An undo creates a reverse proposal and goes through the same apply step — there’s no separate shortcut (source). Which steps a proposal goes through: see Approve AdPilot proposals, then apply.

According to the Docs page, with undo you know exactly what’s being rolled back (source).

2. When it applies straight away, and when it waits

CaseWhat happens
The real level is “Full”, the account hasn’t been edited since, and the reverse change is low-risk, or the original change was low-risk and made within the last 24 hoursApplied automatically, because it reverses a change you already approved (source).
The account has been edited since the applyThe undo waits for an approver like any other proposal (source).
Removing an asset group that is running or has had impressions, and any other caseWaits for an approver like any proposal (source).

Approvers are the organisation owner or someone with the Approver role (source). See Organisations and the three roles in AdPilot.

3. What can’t be reversed

Where something can’t be reversed, such as deleting a campaign, AdPilot says so (source). Before agreeing to a proposal that deletes something, read it carefully: what’s deleted may not come back.

4. Check it in the log

Each apply goes into the log: who approved, when, and how it turned out; for Google Ads, runs that failed or were blocked are recorded too (source). When it applies, AdPilot reports the result item by item — if only part succeeds, it says exactly which items failed — and records it in the log (source).

According to the AdPilot for Meta Ads page, the Activity log on the ALFA web app is one timeline shared by AdPilot for Google Ads and AdPilot for Meta Ads, filtered by account, result and date (source).

Use the log to:

  • find the apply you want to roll back, before you undo it;
  • see which items failed when an apply only partly succeeded;
  • see who approved a change, and when.

Why undo has no shortcut

With two write paths you have to guard two places, and the one nobody watches is the one that breaks. A single door is easy to guard, easy to log, and when something goes wrong there’s only one place to look (source).

Checklist

  • Found the apply you want to roll back in the log
  • Checked: real level “Full” · account not edited since · reverse change low-risk (or original low-risk and made within the last 24 hours) ⇒ applied automatically; removing an asset group that is running or has had impressions, and any other case ⇒ waits for an approver
  • Read what AdPilot says can’t be reversed (for example, a deleted campaign)
  • After the undo: checked the result item by item

AdPilot for Google Ads · Docs: The approval gate

💬 Need help? Join the ALFA Software support group on Telegram (ask in your own language) — or message our support bot privately about your account or invoices.

Checked against ALFA’s AdPilot for Google Ads, AdPilot for Meta Ads and Docs pages on 8 Nov 2026.

Sources

  1. ALFA Software — AdPilot for Google Ads: https://alfasoftwares.com/en/adpilot-google
  2. ALFA Software — Docs (The approval gate): https://alfasoftwares.com/en/tai-lieu#cong-duyet
  3. ALFA Software — AdPilot for Meta Ads: https://alfasoftwares.com/en/adpilot-meta